Jump to content
Blue Purple Red Orange Gold Green Teal Chocolate Charcoal
Blue Purple Red Orange Gold Green Teal Chocolate Charcoal
krawhitham

controller.cfg for XBOX 360 controller (for MVP on the PC)

Recommended Posts

I've followed the instructions a few times and everything is working...for the most part.

I cannot pick people off or lead my runners. Any help would be appreciated.

Share this post


Link to post
Share on other sites

Here's what I got so far, although (1) my slides are coming out awkward (2) My switch fielder aint working so well (3)When I accidentally press in the left stick it pauses

profile= XBCD_XBox_Gamepad

device= XBCD_XBox_Gamepad

player= 1

number_of_buttons= 12

number_of_povs= 1

number_of_axis= 7

VPAD_VIRTUAL_BUTTON_START= button 7

VPAD_VIRTUAL_BUTTON_SELECT= button 8

VPAD_VIRTUAL_BUTTON_CROSS= button 1

VPAD_VIRTUAL_BUTTON_CIRCLE= button 2

VPAD_VIRTUAL_BUTTON_SQUARE= button 3

VPAD_VIRTUAL_BUTTON_TRIANGLE= button 4

VPAD_VIRTUAL_BUTTON_L1= button 5

VPAD_VIRTUAL_BUTTON_R1= button 6

VPAD_VIRTUAL_BUTTON_L2= button 11

VPAD_VIRTUAL_BUTTON_R2= button 12

VPAD_VIRTUAL_BUTTON_L3= button 7

VPAD_VIRTUAL_BUTTON_R3= button 8

VPAD_VIRTUAL_BUTTON_DPAD_UP= pov0 1

VPAD_VIRTUAL_BUTTON_DPAD_DOWN= pov180 1

VPAD_VIRTUAL_BUTTON_DPAD_LEFT= pov270 1

VPAD_VIRTUAL_BUTTON_DPAD_RIGHT= pov90 1

VPAD_VIRTUAL_BUTTON_L_STICK_RIGHT= axis- 1

VPAD_VIRTUAL_BUTTON_L_STICK_LEFT= axis+ 1

VPAD_VIRTUAL_BUTTON_L_STICK_UP= axis+ 2

VPAD_VIRTUAL_BUTTON_L_STICK_DOWN= axis- 2

VPAD_VIRTUAL_BUTTON_R_STICK_RIGHT= axis+ 5

VPAD_VIRTUAL_BUTTON_R_STICK_LEFT= axis- 5

VPAD_VIRTUAL_BUTTON_R_STICK_UP= axis- 4

VPAD_VIRTUAL_BUTTON_R_STICK_DOWN= axis+ 4

VPAD_PITCH_1= button 1

VPAD_PITCH_2= button 2

VPAD_PITCH_3= button 4

VPAD_PITCH_4= button 3

VPAD_PITCH_5= button 6

VPAD_FIELD_PICK_OFF_THROW_FIRST= button 2

VPAD_FIELD_PICK_OFF_THROW_SECOND= button 4

VPAD_FIELD_PICK_OFF_THROW_THIRD= button 3

VPAD_PITCH_OUT= button 1

VPAD_THROW_BALL= not_assigned -1

VPAD_INTENTIONAL_WALK= button 8

VPAD_INTENTIONAL_HITBATTER= button 5

VPAD_PITCH_HISTORY_OPEN= button 10

VPAD_SWING_NORMAL= button 1

VPAD_SWING_BUNT= button 8

VPAD_CHARGE_MOUND= button 4

VPAD_FIELD_THROW_FIRST= button 2

VPAD_FIELD_THROW_SECOND= button 3

VPAD_FIELD_THROW_THIRD= button 4

VPAD_FIELD_THROW_HOME= button 1

VPAD_FIELD_SWITCH= button 6

VPAD_FIELD_RELAY_THROW= button 11

VPAD_FIELD_CUTOFF_THROW= button 11

VPAD_FIELD_FAKE_RUNDOWN_THROW= button 12

VPAD_RUNNER_FIRST_SELECT= button 2

VPAD_RUNNER_SECOND_SELECT= button 4

VPAD_RUNNER_THIRD_SELECT= button 3

VPAD_RUNNER_RUNFIRST= pov90 1

VPAD_RUNNER_RUNSECOND= pov0 1

VPAD_RUNNER_RUNTHIRD= pov270 1

VPAD_RUNNER_RUNHOME2SCORE= pov180 1

VPAD_BASERUNNER_ADVANCEALL= button 11

VPAD_BASERUNNER_RETREATALL= button 12

Share this post


Link to post
Share on other sites

So I don't have a Microsoft Controller. I have a Pelican 360 controller instaed (it was like $10-$15 cheaper). Now button wise it worked the same as the Micrsoft one in other games. My problem is with the drivers. It doesn't list the controller as Xbox 360 for Windows; it just says "Gamepad (Controller)." I also installed the original Microsoft Drivers (which didn't really change anything). When I go to install the updated drivers they don't show up in the selection window(Step 13). Am I screwed because It's not Microsoft?

Share this post


Link to post
Share on other sites

Jeeze, these past threads made it seem like there were problems and it has yet to be fixed? Kraw's original .cfg file is near perfect, the only error being the cut-off/relay overlaping w/ the fake throw, simple edit and that is all however. Great files, thanks much... not sure why so many are having problems with it?

Share this post


Link to post
Share on other sites

Yama, there are so many having problems with it because they don't bother to do any research for themselves. They look at the first page of the forum, don't do a search, then post their question right away.

I think this thread should get a sticky. :)

Share this post


Link to post
Share on other sites

Do you think all of this can also apply to the SmartJoy X2 adapter and an original Xbox controller?

Share this post


Link to post
Share on other sites

Can someone make me a config using these controls for the Xbox controller? Here is a good image of the controller I'm using

Xbox Controller

Offense	


Batting	


Swing	A


Bunt	Click and hold right analog stick


Move in batters box	Black + Left Analog Stick < or >


Charge Mound	Y


Pause	Start 


Pitch Replay	Back button


Pure Swing	A + Left Analog Stick Direction




Baserunning	


Control runner 1st, 2nd, 3rd	B, Y, or X respectively


Steal/choose base	Directional Pad up (2nd), down (home) left (third) right (first)


advance all runners	Left trigger


retreat all runners	Right trigger


Return to bag (Pick-off)	Right analog to the right or down


Headfirst slide / Railroad catcher	Right analog up


Headfirst slide to left or right	Right analog upper left or upper right


Pop-up slide	Right analog down


Hook slide to left or right	Right analog lower left or lower right




Defense	


Pitching	


Choose location	Left analog stick


Throw Pitch	A, B, Y, X, Black button


Quick Pickoff	Left trigger + B, Y, or X


Normal Pickoff	Right trigger + B, Y, or X


Pitchout	Left trigger + A


Intentional Walk	Left trigger + right analog click


Intentional Hit Batter	Left trigger + left analog click


Choose infield/outfield alignment	White button (hold) choose alignment with < or > on d-pad


Pitching History View	Left analog stick Click and hold, Left and Right trigger to toggle at bats


View bullpend/Dugout	White button (hold) toggle between bullpen and dugout with < or > on d-pad




Fielding	


Move Fielder	Left analog stick


Change fielders	Left trigger


Dive/Stretch	Right analog stick towards direction of ball


Climb wall/Jump for high ball	Right analog stick up


Sliding catch	Right analog stick down


Throw to home, 1st, 2nd, 3rd	A, B, Y, X


Cut-off man, Relay throw	Black button


Fake throw	Right trigger after beginning throw

Share this post


Link to post
Share on other sites

Question. I'm guessing it has to do with the controller.cfg, when playing with my friend it seems only the first controller is fixed. We did everything to the second controller that we did to the first, but no go. Guessing it's the .cfg file. Need to copy and rename something else?

Share this post


Link to post
Share on other sites

I just got a 360 controller but when i get to step 17 it says to open under setup but i can't find a profile. What am i doing wrong?

Share this post


Link to post
Share on other sites

The profile is conveniently located (and labelled) in the initial post.

Share this post


Link to post
Share on other sites

I'm not seeing it. I must be blind or something. I mean when i click open it brings me to my folders but what folder is the profile in?

Also, how do you slide? The right analog does nothing?

Share this post


Link to post
Share on other sites

That version is almost perfect but the sliding is messed up. When i push up he slides feet first when he should slide head first. Any suggestions?

Share this post


Link to post
Share on other sites

Switch the axis for the right joystiq in the controller.cfg file.

Has anyone seen the update for the 360 controller driver on Windows Update? Does this seem to be a worthwhile update, or should I just stick with what works?

Share this post


Link to post
Share on other sites

can someone help me here ii got button correct but for some reason The "X" button doe snot work when im trying to pitch so when i press "Y" it Pitches what the "X" button pitch is suppose to be, so the pitch that is on top were "Y" is supose to be used i cant use it.

heres the configuration thing


profile= XBOX_360_For_Windows_(Controller)
device= XBOX_360_For_Windows_(Controller)
player= 0
number_of_buttons= 10
number_of_povs= 1
number_of_axis= 5
VPAD_VIRTUAL_BUTTON_START= button 9
VPAD_VIRTUAL_BUTTON_SELECT= not_assigned -1
VPAD_VIRTUAL_BUTTON_CROSS= button 1
VPAD_VIRTUAL_BUTTON_CIRCLE= button 2
VPAD_VIRTUAL_BUTTON_SQUARE= button 4
VPAD_VIRTUAL_BUTTON_TRIANGLE= button 5
VPAD_VIRTUAL_BUTTON_L1= button 7
VPAD_VIRTUAL_BUTTON_R1= button 8
VPAD_VIRTUAL_BUTTON_L2= button 6
VPAD_VIRTUAL_BUTTON_R2= button 3
VPAD_VIRTUAL_BUTTON_L3= not_assigned -1
VPAD_VIRTUAL_BUTTON_R3= not_assigned -1
VPAD_VIRTUAL_BUTTON_DPAD_UP= pov0 1
VPAD_VIRTUAL_BUTTON_DPAD_DOWN= pov180 1
VPAD_VIRTUAL_BUTTON_DPAD_LEFT= pov270 1
VPAD_VIRTUAL_BUTTON_DPAD_RIGHT= pov90 1
VPAD_VIRTUAL_BUTTON_L_STICK_RIGHT= axis- 1
VPAD_VIRTUAL_BUTTON_L_STICK_LEFT= axis+ 1
VPAD_VIRTUAL_BUTTON_L_STICK_UP= axis+ 2
VPAD_VIRTUAL_BUTTON_L_STICK_DOWN= axis- 2
VPAD_VIRTUAL_BUTTON_R_STICK_RIGHT= axis- 4
VPAD_VIRTUAL_BUTTON_R_STICK_LEFT= axis+ 4
VPAD_VIRTUAL_BUTTON_R_STICK_UP= axis+ 5
VPAD_VIRTUAL_BUTTON_R_STICK_DOWN= axis- 5
VPAD_PITCH_1= button 5
VPAD_PITCH_2= button 1
VPAD_PITCH_3= button 2
VPAD_PITCH_4= button 4
VPAD_PITCH_5= button 6
VPAD_FIELD_PICK_OFF_THROW_FIRST= button 2
VPAD_FIELD_PICK_OFF_THROW_SECOND= button 4
VPAD_FIELD_PICK_OFF_THROW_THIRD= button 3
VPAD_PITCH_OUT= button 1
VPAD_THROW_BALL= axis+ 1
VPAD_INTENTIONAL_WALK= button 6
VPAD_INTENTIONAL_HITBATTER= button 10
VPAD_PITCH_HISTORY_OPEN= button 7
VPAD_SWING_NORMAL= button 1
VPAD_SWING_BUNT= button 10
VPAD_CHARGE_MOUND= button 5
VPAD_FIELD_THROW_FIRST= button 2
VPAD_FIELD_THROW_SECOND= button 4
VPAD_FIELD_THROW_THIRD= button 3
VPAD_FIELD_THROW_HOME= button 1
VPAD_FIELD_SWITCH= axis- 3
VPAD_FIELD_RELAY_THROW= button 5
VPAD_FIELD_CUTOFF_THROW= button 6
VPAD_FIELD_FAKE_RUNDOWN_THROW= axis+ 3
VPAD_RUNNER_FIRST_SELECT= button 2
VPAD_RUNNER_SECOND_SELECT= button 4
VPAD_RUNNER_THIRD_SELECT= button 3
VPAD_RUNNER_RUNFIRST= pov90 1
VPAD_RUNNER_RUNSECOND= pov0 1
VPAD_RUNNER_RUNTHIRD= pov270 1
VPAD_RUNNER_RUNHOME2SCORE= pov180 1
VPAD_BASERUNNER_ADVANCEALL= axis- 3
VPAD_BASERUNNER_RETREATALL= axis+ 3

Share this post


Link to post
Share on other sites

Anyone having issues intentionally walking with this config? All my other buttons work flawlessly but I can't intentionally walk anyone.

Share this post


Link to post
Share on other sites

Anyone having issues intentionally walking with this config? All my other buttons work flawlessly but I can't intentionally walk anyone.

Never mind guys I figured it out, anyone else who wasn't sure you have to press the left shoulder button (pickoff button) + the applicable button for intentional walks and intentional HBPs.

Share this post


Link to post
Share on other sites

okay i am i FAT newbie....please anyone, that could give me step-by-step instructions...i used the xbcd driver, all is fine EXCEPT X is pitch history, not an actual pitch

Share this post


Link to post
Share on other sites

Hi, big newbie also.

No matter what i do (with the 360 controller) i cant seem to do things like move the batter in the batters box, or pick off bases before the pitch.

Also, is the Dpad and left analog independant? It seems to me they do the same job if i assign one key to something.

Any help would be apprieciated.

Share this post


Link to post
Share on other sites

After searching the net and this thread, I wasn't able to get a .cfg file that worked perfectly with the 360 controller using the XBCD XP config program and their 0.2.1 drivers(the .inf file). My 5th pitch would be mapped to LB(R1 on a ps2 pad) and a host of other mis-mappings. I went through my config line by line and matched it exactly to my previous PS2 pad's configurations(using a RadioShack adapter). I've played a few games, and all the buttons are exactly set to mirror the PS2 button placement. I can even get the intentional walk/hit batter sequence to work right. :D

This is the code assuming you have the above mentioned XBCD XP drivers...I'll go through the code again assuming you have the windows xbox360 driver to see if I can get it to work that way. I play Madden 07 as well, and that game is specifially designed to take advantage of the xbox 360 controller...assuming you have the win drivers installed. I'd rather not have to switch drivers everytime I want to switch between Madden and MVP. :)

profile= XBCD_XBox_Gamepad

device= XBCD_XBox_Gamepad

player= 1

number_of_buttons= 12

number_of_povs= 1

number_of_axis= 7

VPAD_VIRTUAL_BUTTON_START= button 7

VPAD_VIRTUAL_BUTTON_SELECT= button 8

VPAD_VIRTUAL_BUTTON_CROSS= button 1

VPAD_VIRTUAL_BUTTON_CIRCLE= button 2

VPAD_VIRTUAL_BUTTON_SQUARE= button 3

VPAD_VIRTUAL_BUTTON_TRIANGLE= button 4

VPAD_VIRTUAL_BUTTON_L1= button 5

VPAD_VIRTUAL_BUTTON_R1= button 6

VPAD_VIRTUAL_BUTTON_L2= button 11

VPAD_VIRTUAL_BUTTON_R2= button 12

VPAD_VIRTUAL_BUTTON_L3= button 9

VPAD_VIRTUAL_BUTTON_R3= button 10

VPAD_VIRTUAL_BUTTON_DPAD_UP= pov0 1

VPAD_VIRTUAL_BUTTON_DPAD_DOWN= pov180 1

VPAD_VIRTUAL_BUTTON_DPAD_LEFT= pov270 1

VPAD_VIRTUAL_BUTTON_DPAD_RIGHT= pov90 1

VPAD_VIRTUAL_BUTTON_L_STICK_RIGHT= axis- 1

VPAD_VIRTUAL_BUTTON_L_STICK_LEFT= axis+ 1

VPAD_VIRTUAL_BUTTON_L_STICK_UP= axis+ 2

VPAD_VIRTUAL_BUTTON_L_STICK_DOWN= axis- 2

VPAD_VIRTUAL_BUTTON_R_STICK_RIGHT= axis+ 4

VPAD_VIRTUAL_BUTTON_R_STICK_LEFT= axis- 4

VPAD_VIRTUAL_BUTTON_R_STICK_UP= axis+ 5

VPAD_VIRTUAL_BUTTON_R_STICK_DOWN= axis- 5

VPAD_PITCH_1= button 1

VPAD_PITCH_2= button 2

VPAD_PITCH_3= button 3

VPAD_PITCH_4= button 4

VPAD_PITCH_5= button 6

VPAD_FIELD_PICK_OFF_THROW_FIRST= button 2

VPAD_FIELD_PICK_OFF_THROW_SECOND= button 4

VPAD_FIELD_PICK_OFF_THROW_THIRD= button 3

VPAD_PITCH_OUT= button 1

VPAD_THROW_BALL= not_assigned -1

VPAD_INTENTIONAL_WALK= button 10

VPAD_INTENTIONAL_HITBATTER= button 9

VPAD_PITCH_HISTORY_OPEN= button 9

VPAD_SWING_NORMAL= button 1

VPAD_SWING_BUNT= button 10

VPAD_CHARGE_MOUND= button 4

VPAD_FIELD_THROW_FIRST= button 2

VPAD_FIELD_THROW_SECOND= button 4

VPAD_FIELD_THROW_THIRD= button 3

VPAD_FIELD_THROW_HOME= button 1

VPAD_FIELD_SWITCH= button 5

VPAD_FIELD_RELAY_THROW= button 12

VPAD_FIELD_CUTOFF_THROW= button 12

VPAD_FIELD_FAKE_RUNDOWN_THROW= button 6

VPAD_RUNNER_FIRST_SELECT= button 2

VPAD_RUNNER_SECOND_SELECT= button 4

VPAD_RUNNER_THIRD_SELECT= button 3

VPAD_RUNNER_RUNFIRST= pov90 1

VPAD_RUNNER_RUNSECOND= pov0 1

VPAD_RUNNER_RUNTHIRD= pov270 1

VPAD_RUNNER_RUNHOME2SCORE= pov180 1

VPAD_BASERUNNER_ADVANCEALL= button 5

VPAD_BASERUNNER_RETREATALL= button 6

To the above posters...go to your 'my documents' and search for the 'mvp 2005' folder. Open up the controller.cfg file with notepad and search for the paragraph with the XBCD controller name. If it's not there, just add this past code to the end of the file...make sure you leave a space between this code and the previous paragraph.

If the entry is already there, replace it with this code.

Open up MVP, pick your team. Make sure the gamepad is set to the xbcd gamepad.

It should work fine now, like the PS2 pad. :)

edit: I also got the controller to work the the basic windows xp drivers. The controller DOES NOT VIBRATE with the windows drivers, but otherwise works flawlessly as a PS2 pad substitute:

profile= XBOX_360_For_Windows_(Controller)

device= XBOX_360_For_Windows_(Controller)

player= 1

number_of_buttons= 10

number_of_povs= 1

number_of_axis= 5

VPAD_VIRTUAL_BUTTON_START= button 8

VPAD_VIRTUAL_BUTTON_SELECT= button 7

VPAD_VIRTUAL_BUTTON_CROSS= button 1

VPAD_VIRTUAL_BUTTON_CIRCLE= button 2

VPAD_VIRTUAL_BUTTON_SQUARE= button 3

VPAD_VIRTUAL_BUTTON_TRIANGLE= button 4

VPAD_VIRTUAL_BUTTON_L1= button 5

VPAD_VIRTUAL_BUTTON_R1= button 6

VPAD_VIRTUAL_BUTTON_L2= axis- 3

VPAD_VIRTUAL_BUTTON_R2= axis+ 3

VPAD_VIRTUAL_BUTTON_L3= button 9

VPAD_VIRTUAL_BUTTON_R3= button 10

VPAD_VIRTUAL_BUTTON_DPAD_UP= pov0 1

VPAD_VIRTUAL_BUTTON_DPAD_DOWN= pov180 1

VPAD_VIRTUAL_BUTTON_DPAD_LEFT= pov270 1

VPAD_VIRTUAL_BUTTON_DPAD_RIGHT= pov90 1

VPAD_VIRTUAL_BUTTON_L_STICK_RIGHT= axis- 1

VPAD_VIRTUAL_BUTTON_L_STICK_LEFT= axis+ 1

VPAD_VIRTUAL_BUTTON_L_STICK_UP= axis+ 2

VPAD_VIRTUAL_BUTTON_L_STICK_DOWN= axis- 2

VPAD_VIRTUAL_BUTTON_R_STICK_RIGHT= axis- 4

VPAD_VIRTUAL_BUTTON_R_STICK_LEFT= axis+ 4

VPAD_VIRTUAL_BUTTON_R_STICK_UP= axis+ 5

VPAD_VIRTUAL_BUTTON_R_STICK_DOWN= axis- 5

VPAD_PITCH_1= button 1

VPAD_PITCH_2= button 2

VPAD_PITCH_3= button 3

VPAD_PITCH_4= button 4

VPAD_PITCH_5= button 6

VPAD_FIELD_PICK_OFF_THROW_FIRST= button 2

VPAD_FIELD_PICK_OFF_THROW_SECOND= button 4

VPAD_FIELD_PICK_OFF_THROW_THIRD= button 3

VPAD_PITCH_OUT= button 1

VPAD_THROW_BALL= not_assigned -1

VPAD_INTENTIONAL_WALK= button 10

VPAD_INTENTIONAL_HITBATTER= button 9

VPAD_PITCH_HISTORY_OPEN= button 9

VPAD_SWING_NORMAL= button 1

VPAD_SWING_BUNT= button 10

VPAD_CHARGE_MOUND= button 4

VPAD_FIELD_THROW_FIRST= button 2

VPAD_FIELD_THROW_SECOND= button 4

VPAD_FIELD_THROW_THIRD= button 3

VPAD_FIELD_THROW_HOME= button 1

VPAD_FIELD_SWITCH= button 5

VPAD_FIELD_RELAY_THROW= axis+ 3

VPAD_FIELD_CUTOFF_THROW= axis+ 3

VPAD_FIELD_FAKE_RUNDOWN_THROW= button 6

VPAD_RUNNER_FIRST_SELECT= button 2

VPAD_RUNNER_SECOND_SELECT= button 4

VPAD_RUNNER_THIRD_SELECT= button 3

VPAD_RUNNER_RUNFIRST= pov90 1

VPAD_RUNNER_RUNSECOND= pov0 1

VPAD_RUNNER_RUNTHIRD= pov270 1

VPAD_RUNNER_RUNHOME2SCORE= pov180 1

VPAD_BASERUNNER_ADVANCEALL= button 5

VPAD_BASERUNNER_RETREATALL= button 6

Share this post


Link to post
Share on other sites

I needed the XBCD drivers again and all that, and since Total-Classics is down, I have found the Installation setup over at EAmods.com... So I will also post it on here so people like me don't need to go searching all over the place...

here's the link...

http://www.eamods.com/index.php?name=Forum...+360+controller

Thanks once again Kraw!

Share this post


Link to post
Share on other sites

I am having quite a bit of trouble doing this. When I plug in my controller how do I get the original drivers? If someone could help me step by step that would be awesome. I'd be very grateful. Thanks.

Share this post


Link to post
Share on other sites

hey I installed the 360 drivers for the PC and hooked up my XBOX360 controller. It works with the game, but when I reboot the comp it freezes at the BIOS screen. Any idea why?

Share this post


Link to post
Share on other sites

I just got the wireless gaming adapter for PC, does anyone have the controller.cfg file for it so that the 360 controller works right. I think it just needs the right name, but i don't know where to look for that.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...