Jump to content
Blue Purple Red Orange Gold Green Teal Chocolate Charcoal
Blue Purple Red Orange Gold Green Teal Chocolate Charcoal
Gordo

Baseup! Rosters 2014 ~ (Phase 4)

Recommended Posts

index.php?app=downloads&module=display&s

File Name: BaseUp! Rosters 2014 ~ (Phase 4)

File Submitter: daflyboys

File Submitted: 23 Aug 2014

File Category: Rosters

Version: 1.0

A tremendous thanks ENCbase13 for helping with updates, especially uniform number corrections!!

Also a big thanks to LARO for keeping up with the trades and OSCAR for the input on batting stances.

VERSION: 2014 Phase 4 (MLB Focused) ~ End of Season (last roster set of the year)

Release Date: 08.23.14

*Typically, players included on 25 man roster who provided higher percentage of service during the year, some exceptions made. This includes players who have had season ending injuries. (if you think a certain player should be up on the 25-man roster instead of someone else, then it's easy enough to move players around either in game or with MVPedit).

*ALL pitchers' control changed based on THIS YEAR'S ERA

*Pitcher stamina fixes done for those who seemed significantly low.

*Top and bottom 2 BA's for qualified players given a contact/power adjustment if needed.

*A few players' speed adjusted.

*Transactions to date of release (please note any corrections needed)

*** Works best with MVP 08 / MVP 12 / MVP 13 Total Conversion Mods ***

INSTALLATION: Delete existing 19 .dat files from your MVP2005/data/database subfolder, then unzip this roster to that location.

NOTE!!! If you are getting freezes during your franchise/season, it is most likely because you have injuries and/or suspensions set to "ON". Start a new season with these turned "OFF" and attempt to sim the entire season. If successful, then freezes are occurring because there are not enough players in a given organization.

Share this post


Link to post
Share on other sites

You are so awesome! Your adjustments to players are very precise... thank you

Share this post


Link to post
Share on other sites

I decided that along the way if I discover any glaring mismatches with a given player (which usually happens with pitchers), I'll post them here versus the DL area.

There will be an .mep file for those who can use MVPedit, otherwise I'll post the necessary lines for the given roster .dat file which anyone can copy and paste within a given .dat file.

Simply, open with Wordpad, make sure word wrap is off, copy the given line here, highlight for the same player within the .dat file you just opened in Wordpad, and paste over that line. Save. This will not be reflected in your on-going season/franchise.

Additionally, I don't mess with contract/salary stuff.

Also, wanted to thank Dylan for his great pitcher stamina calculator. I've used it countless times.

#1: KEVIN GAUSMAN, P, BALTIMORE ORIOLES (2014)

For attrib.dat: 0fff0c8d0,0 Kevin,1 Gausman,2 39,3 0,4 0,5 0,6 10,7 27,8 90,9 28,10 902,11 0,12 3,13 5,14 0,15 1,16 5712,17 1,18 2,19 2,20 0,21 3,22 43,23 4,24 2,25 12,26 7,27 12,28 0,29 0,30 0,31 1,32 0,33 0,34 0,35 2,36 0,37 0,38 1,39 0,40 0,41 5,42 1,43 1,44 0,45 15712,;

For pitcher.dat: 0fff0c8d0,0 Kevin,1 Gausman,2 68,3 1,4 0,5 0,6 69,7 93,8 11,9 7,10 3,11 65,12 82,13 6,14 8,15 2,16 60,17 78,18 -,19 -,20 -,21 -,22 -,23 -,24 -,25 -,26 -,27 -,28 43,;

---------------------------------------------------------------------------------

#2: JUMBO DIAZ, RP, CINCINNATI REDS

For attrib.dat: 0fff0cf6b,0 Jumbo,1 Diaz,2 70,3 0,4 0,5 10,6 0,7 28,8 199,9 37,10 909,11 0,12 3,13 0,14 7,15 2,16 8128,17 1,18 1,19 3,20 0,21 1,22 43,23 1,24 0,25 9,26 4,27 9,28 3,29 4,30 0,31 1,32 0,33 0,34 0,35 2,36 0,37 4,38 7,39 2,40 0,41 3,42 0,43 0,44 0,45 13207,;

For pitcher.dat: 0fff0cf6b,0 Jumbo,1 Diaz,2 27,3 0,4 0,5 0,6 73,7 95,8 6,9 7,10 5,11 68,12 85,13 8,14 4,15 3,16 44,17 94,18 -,19 -,20 -,21 -,22 -,23 -,24 -,25 -,26 -,27 -,28 40,;

---------------------------------------------------------------------------------

Gausman, Kevin MEP.rar

Diaz, Jumbo MEP.rar

Share this post


Link to post
Share on other sites

Thank you, Thank You, THANK YOU for the .mep files. I'm the one who asks for the .mbe files for roster sets, since I like to plug the new rosters into MVPEdit and look around before uploading them into the game.

EDIT: New problem: imported Diaz.mep into the lineup via MVPedit no problem. I got Gausman in fine too but then deleted the new one instead of the old one (I accidently did Add instead of Replace), so I delete the old one (oops) then go to import the new one again and I get an error msg: This file is not a valid MEP file. Same time I realize he was on the AL Future Stars team and deleting him took him off BAL *AND* AFS. Now I can't import ANY player into ANY team. I'm troubleshooting now (i.e. tried importing in an old version of Gausman) but coming to the end of my rope.

Share this post


Link to post
Share on other sites

Sure thing guys.... and Jaxen, you can import any roster file as well with MVPedit when the .mbe isn't given.

Share this post


Link to post
Share on other sites

Thank you, Thank You, THANK YOU for the .mep files. I'm the one who asks for the .mbe files for roster sets, since I like to plug the new rosters into MVPEdit and look around before uploading them into the game.

EDIT: New problem: imported Diaz.mep into the lineup via MVPedit no problem. I got Gausman in fine too but then deleted the new one instead of the old one (I accidently did Add instead of Replace), so I delete the old one (oops) then go to import the new one again and I get an error msg: This file is not a valid MEP file. Same time I realize he was on the AL Future Stars team and deleting him took him off BAL *AND* AFS. Now I can't import ANY player into ANY team. I'm troubleshooting now (i.e. tried importing in an old version of Gausman) but coming to the end of my rope.

Not sure I followed all that, but anytime I run in error messages with MVPedit, I reboot my PC. Only thing I've found to make it behave.

Share this post


Link to post
Share on other sites

Thank you, Thank You, THANK YOU for the .mep files. I'm the one who asks for the .mbe files for roster sets, since I like to plug the new rosters into MVPEdit and look around before uploading them into the game.

EDIT: New problem: imported Diaz.mep into the lineup via MVPedit no problem. I got Gausman in fine too but then deleted the new one instead of the old one (I accidently did Add instead of Replace), so I delete the old one (oops) then go to import the new one again and I get an error msg: This file is not a valid MEP file. Same time I realize he was on the AL Future Stars team and deleting him took him off BAL *AND* AFS. Now I can't import ANY player into ANY team. I'm troubleshooting now (i.e. tried importing in an old version of Gausman) but coming to the end of my rope.

I had the same problem, you should not choose the option to replace player.
You must delete the old player and then add the new player of BAL and the future star.

Share this post


Link to post
Share on other sites

@Daflyboys: I tried rebooting. Nothing changed.

@Oscar Morales: I did "add", not "replace". I added Gausman then deleted what I just imported instead of the old one (more of a mis-click). New Gausman had the same # as the one already in the roster, so then I deleted the old one and when I tried to re-import the new one I got the error msg, which I now get every time I try to import ANY player to ANY team from ANY roster set.

Share this post


Link to post
Share on other sites

Zip up and send me everything you're working with. We'll take this to the PM's.

Share this post


Link to post
Share on other sites

Adding to the .dat files above doesn't work. I wasn't thinking straight about it. Not sure if I'm going to do it that way...... just .mep's...... sorry.

Correction: actually it will work for players already existing. It wouldn't work on a new created player. I think it was too late when I was looking back on this.

Share this post


Link to post
Share on other sites

#3: JEFF LOCKE, SP, PITTSBURGH PIRATES (2014)

For attrib.dat: 0fff0c637,0 Jeff,1 Locke,2 49,3 1,4 1,5 0,6 10,7 26,8 80,9 28,10 209,11 0,12 2,13 0,14 0,15 1,16 7528,17 1,18 3,19 2,20 0,21 5,22 43,23 4,24 4,25 11,26 7,27 10,28 0,29 0,30 0,31 1,32 0,33 0,34 0,35 2,36 0,37 2,38 2,39 4,40 0,41 3,42 0,43 0,44 0,45 14569,;

For pitcher.dat: 0fff0c637,0 Jeff,1 Locke,2 80,3 0,4 0,5 0,6 68,7 88,8 1,9 8,10 4,11 52,12 78,13 12,14 9,15 3,16 60,17 76,18 8,19 2,20 5,21 53,22 88,23 -,24 -,25 -,26 -,27 -,28 0,;

---------------------------------------------------------------------------------

#4: TONY WATSON, RP, PITTSBURGH PIRATES (2014)

For attrib.dat: 0fff0bda4,0 Tony,1 Watson,2 44,3 1,4 1,5 10,6 10,7 28,8 120,9 29,10 223,11 0,12 3,13 5,14 0,15 1,16 5405,17 1,18 4,19 6,20 0,21 5,22 43,23 4,24 4,25 10,26 8,27 8,28 0,29 6,30 4,31 1,32 0,33 0,34 0,35 2,36 0,37 2,38 1,39 4,40 0,41 2,42 0,43 0,44 0,45 13665,;

For pitcher.dat: 0fff0bda4,0 Tony,1 Watson,2 28,3 1,4 2,5 3,6 79,7 86,8 5,9 3,10 5,11 91,12 92,13 6,14 10,15 2,16 76,17 81,18 1,19 7,20 2,21 79,22 84,23 -,24 -,25 -,26 -,27 -,28 2,;

Locke, Jeff MEP.rar

Watson, Tony MEP.rar

Share this post


Link to post
Share on other sites

#5: JUNIOR LAKE, OF, CHICAGO CUBS (2014)

(contact/power only changed)

For rhattrib.dat: 0fff0cf4f,0 Junior,1 Lake,2 55,3 57,4 0,5 2,6 0,7 0,8 2,9 2,10 0,11 0,12 0,13 34,14 31,15 34,16 2,17 30,18 37,19 31,20 5,21 7,22 10,23 7,24 9,25 9,26 8,27 7,28 9,;

For lhattrib.dat: 0fff0cf4f,0 Junior,1 Lake,2 62,3 65,4 1,5 2,6 1,7 2,8 2,9 2,10 1,11 1,12 2,13 28,14 28,15 44,16 2,17 29,18 38,19 31,20 3,21 5,22 9,23 9,24 5,25 6,26 9,27 8,;

Lake, Junior MEP.rar

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...