Jump to content
Blue Purple Red Orange Gold Green Teal Chocolate Charcoal
Blue Purple Red Orange Gold Green Teal Chocolate Charcoal
Vlad_Zola_Jr

Reditor Ii [Mlb 2K12]

Recommended Posts

Socks colors are probably defined by one of the textures, stored in global.iff, not roster.

Sock colors are defined via the textures in the uniform IFF files for that specific team.

I see... thanks guys

Share this post


Link to post
Share on other sites

before i buy a guru license i need to know if this program will be worth it...for example using tys editor and updated rosters i cannot use all my uniforms i created in game because i run out of space when trying to load them all because of the limits used by the rosters so it will only load so many of my uni's,will this program let me use all unis including future one like the astros new 2013....also i see the guru can edit stadiums,exactly what all will it edit???i just dont wanna pay $20 and still only be able to use limited unis...i can use the generic mod enabler to use every uniform but using that program the colors will be wrong

Share this post


Link to post
Share on other sites

The new version is released!

It adds support for MLB 2K12 XBox 360 files.

The link is located in the first post.

is there away to fix a player that is a cf and show up as a ss in the allstar voting?

No, not possible with REDitor. The value, you're looking for, is stored outside of roster part of franchise files, which is not editable with the editor.

before i buy a guru license i need to know if this program will be worth it...for example using tys editor and updated rosters i cannot use all my uniforms i created in game because i run out of space when trying to load them all because of the limits used by the rosters so it will only load so many of my uni's,will this program let me use all unis including future one like the astros new 2013....also i see the guru can edit stadiums,exactly what all will it edit???i just dont wanna pay $20 and still only be able to use limited unis...i can use the generic mod enabler to use every uniform but using that program the colors will be wrong

You can clone unis with Guru. For example, i was able to add extra 8 unis to Diamondbacks without replacing any existing unis.

There is some file limit, so it's not possible to make unlimited amount of clones, but it shouldn't cause any problem, adding 50 unis (maybe even more), if you don't clone teams, players or other things. You can take a look on Ultimate Base Roster mod for NBA 2K12 to see, how many fully-made (with jerseys, players, staff and arenas) teams were added to the file.

Unofrunately, it's not possible to define the exact amount of free space left, so the rule "clone little-by-little and make backups" should be used. Once you're over the limit, a name corruption will take place (some names will be erased from the file).

Anyway, you can add 50 unis without worrying about the free space limit.

As for Stadiums: please, read the tutorials, which come with the tool. All the parameters and their meanings are listed there.

Share this post


Link to post
Share on other sites

Am I missing something or is it not possible to set lineups, rotations etc. with the editor? Thanks.:)

Share this post


Link to post
Share on other sites

Am I missing something or is it not possible to set lineups, rotations etc. with the editor? Thanks. :)

It is possible. You can try the newest Demo (just uploaded - the link is in the first post).

Share this post


Link to post
Share on other sites

Vlad,

I'm having a few issues with the editors.

First off I have a copy of an Xbox roster that I can open with the 4.5 free retail Reditor but the 4.5 demo will not open it. I get "Access violation at address 0065BA5A in module 'reditor 2 demo.exe" Read of address 00000000".

I have to use task manager to close the program as more of these just keep popping up.

Second problem i'm having is with the 4.5 demo using MLB2k11 for PC. I have two franchise saves one I can open fine but the other is a no go.

With the one that doesn't open i'm getting,

"Access violation at address 0064E1E9 in module 'reditor 2 demo.exe" Read of address 0000007E." Have to close program with task manager as well.

The one that will open is a new franchise only a couple games simmed. The second I went through the draft in June and signed two players which I sent to the minors. I checked all teams and they have 25 players and all lineups were set, so not sure what the problem is. I did in fact try setting up two different franchises with draft etc and neither will open. The funny thing is that I can open both of those saves in Tywiggins editor for 2k11. Any ideas?

Share this post


Link to post
Share on other sites

One thing I thought of that could be causing a problem with the PC 2k11 franchise not loading is that I did open it in Tywiggins editor and changed the two draft picks "potential" rating.

Not sure why the demo won't open the Xbox save though.

Share this post


Link to post
Share on other sites

Thanks Vlad for your continued support of MLB2K12 and the hard work that goes with it. I just got your Editor with Guru license and was briefly playing around but have not done an in depth study of the tutorial yet. In one of your first posts in this thread you stated :

Schedule editing confirmed! The only thing left for decoding is Players Injuries/DL Status.

I just want to confirm this is available now for MLB Franchise play or is it still a W.I.P. ?

Thanks again

Share this post


Link to post
Share on other sites

Does anyone know how to use "Roster Exchanger" or what exactly it's supposed to do? I've playing around with this and no matter what i try all I get is Stream read Error.

Share this post


Link to post
Share on other sites

I posted this in the support forum, but I'll posst it here, just in case Vlad or one of guys that use TURK see it here instead:

--------------------------------------------------------------------------------------------------------------------------------------------------------------------

Ok, I'm trying to get Vlad's demo to reset the Giant's players to 99 energy, but near as I can tell, the instructions Vlad gives for an IF...THEN statement are incorrect. Vlad's help gives the syntax:

a PULSAN b UNSARAN c - IF a THEN b ELSE c

but that SEEMS like it's missing an operator. And if I use,

vay yapali Energize;

{Energize all the Giants}

ulsh

i: int; !!Cycle variable

c: int;

puschla

i valli 0 ran 3600 taran tu !!Here we cycle through all the players

puschla

playersTeamID 10 = PULSAN Players.Energy 99 := UNSARAN c 0 :=; <- <- <- <- <- <- <- <- <-

veschle

veschle.

sure enough, the line noted with <- <- gives me an error saying its expecting a token or one of "E PULSAN RAN TA TARAN TATA"

Can anyone please give me the syntactically correct version of, "If the team is the Giants then energy = 99" please?

On another note, EVERY TURK script I try to run - including Vlad's included uninjure script - gives the error "List index out of bounds ( 8)" just as it ends. (The sunglasssed guy is supposed to be the number eight.)

Any help would be appreciated. Thanks!

Edited by furball

Share this post


Link to post
Share on other sites

I just want to confirm this is available now for MLB Franchise play or is it still a W.I.P. ?

Yes, it is available. Players tab.

sask3m, i'm not sure about the reasons for your errors... Do you run the tool as Administrator and is it white-listed in your Antivirus software?

======================

Players.TeamID 10 = PULSAN Players.Energy 99 := ;

The above line should be correct.

Not sure about the index out of bounds, though. I'll check that later.

There probably be a new version released some time in January, with several minor things fixed. Also Pitchers' Roles... i'll take a look for them.

Edited by Vlad_Zola_Jr

Share this post


Link to post
Share on other sites

Vlad, thanks for your response. Unfortunately, even with your suggested syntax, I get the following error:

Line 10: Syntax Error: Expecting the following tokens: - ( + AN DecLiteral FloatLiteral id StringLiteral

I've copied my routine below. I'm using Windows 7, and the 4.5 demo version on a 2k12 .XFG file.

Also, is there any forum or file that has more instructions for how to use REDitor? For example, I can't for the life of me figure out how to use the TURK Wizard.

Thanks!

furball

EDIT: The script below i just a test. What I really want to do is overcome the program's charging 7 energy on a catcher's 1st game after a rest. So the real line I want is: IF (players.position = catcher AND players.energy = 93) THEN players.energy = 95

Surely others are writing scripts with IF statements? I'd appreciate any help, or a pointer to any online scripts!

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

vay yapali Energize;

{Energize all the Giants}

ulsh

i: int; !!Cycle variable

puschla

i valli 0 ran 3600 taran tu !!Here we cycle through all the players

puschla

Players.TeamID 10 = PULSAN Players.Energy 99 := ;

veschle

veschle.

Edited by furball

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...